"Your Deepest Partner"
EN TR

Ürünler

Katkısız ( Doğal ) Bentonit

BENTONITE MATERIAL SAFETY DATA SHEET
GENERAL INFORMATION OF THE SUPPLIER
Company Name: DDC KIMYA SAN.TIC.LTD.STI.

Section 1: IDENTIFICATION OF PRODUCT
Product Name : BENTONITE POWDER
Product Information : Mineral clay, EXCEL GRADE

Section 2: COMPOSITION I INFORMATION ON INGREDIENTS
Chemical Family : Sodium Montmorillonite
WHMIS CLASSIFICATION : D-2(A)
WORK PLACE HAZARD : Potential carcinogen; Contains free silica
TDG CLASSIFICATION : Not Dangerous Goods
PACKAGE GROUP : Not Applicable

Section 3 : HAZARDOUS INGREDIENTS
Crystalline Silica (SiO2) 7631-86-9
HAZARD : Low concentrations of crystalline silica (SiO2) in the form of quartz, crystobalite, and tridymite may be present in airborne bentonite dust. Concentration level of total free silica in airborne bentonite dust is variable depending upon origin of bentonite ore, fineness of product, moisture content product local humidity and wind conditions, etc.

Section 4 : FIRST-AID MEASURES
Eye contact : Flush eyes with plenty of water. If irritation develops, call a physician.
Skin Contact : Procedures normally not needed. If skin contact occurs flush with plenty of water. If irritation develops, call a physician.
Inhalation : Remove to fresh air. If breathing is difficult, oxygen should be administered by qualified personnel. Call a physician.Get medical attention If vomiting occurs, keep head lower than hips to prevent aspiration.

Section 5 : FIRE FIGHTING MEASURES
Flash point : Nonflammable Auto- Ignition : Not applicable LEL : Not applicable UEL : Not applicable
NFPA Hazard Classification :- Health : 0 Flammable : 0 Reactivity : 0
HMIS Hazard Classification :- Health : 1 * Flammable : 0 Reactivity : 0
*Indicates the possibility of chronic health effects. See Heath Hazards in Section 3 for more information.

Section 6: ACCIDENTAL RELEASE MEASURES
Contain spillage and scoop up or vacuum. Do not use a cleaning method that will generate dust. **NOTE** In the event of an accidental release of this material, the above procedures should be followed. Additionally, proper exposure controls and personal protection equipment should be used (see Section 8: Exposure Control/Personal Protection) and disposal of the material should be in accordance with Section 13 Disposal Considerations

Section 7 : HANDLING AND STORAGE
Wash thoroughly after handling.
Keep container closed. ,Avoid breakage of bagged material or spills of bulk material. Use dustless systems for handling, storage, and clean up so that airborne dust does not exceed the PEL. Use adequate ventilation and dust collection. Practice goodhousekeeping. Do not permit dust to collect on walls, floors, sills, ledges, machinery, or equipment. Maintain, clean, and fit test respirators in accordance with OSHA regulations. Maintain and test ventilation and dust collection equipment. Wash or vacuum clothing which has become dusty. We recommend that smoking be prohibited in all areas where respirators must be used. See also American Society for Testing and Materials (ASTM) standard practice E 113286, "Standard Practice for Health Requirements Relating to Occupational Exposure to Quartz Dust."
Avoid breathing dust.
Avoid contact with eyes. Use only with adequate ventilation.

Section 8: EXPOSURE CONTROL / PERSONAL PROTECTION
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Safety glasses. Maintain eye wash fountain and quick-drench facilities in work area.

Section 9: PHYSICAL DATA
APPEARANCE AND ODOUR : Greenish to yellow as moist solid, light tan to grey as dry.
SPECIFIC GRAVITY : 2.45 - 2.55
BOILING POINT (OC) : Not Applicable
MELTING POINT (°C) : 1450°C
SOLUBILITY IN WATER: Insoluble; forms colloidal suspension
pH @ 1.0% : 8-10
PERCENT VOLATILE BY VOLUME: 13% Maximum (H2O)
EVAPORATION RATE : Not Applicable
VAPOUR PRESSURES (mm Hg): Not Applicable
DENSITY (@ 20°C) : 2.65 Gm/CM2 as product Powder

Section 10 : REACTIVITY DATA
STABILITY : Stable
INCOMPATIBILITY (conditions to avoid): None HAZARDOUS DECOMPOSITION PRODUCTS: None
HAZARDOUS POLYMERIZATION: Will not occur

Section 11: TOXICOLOGICAL PROPERTIES
Route of Entry:
SKIN : Yes
EYE CONTACT : Yes
INHALATION : Yes
INGESTION : No
SKIN CONTACT : Possible drying resulting in dermatitis.
EYE CONTACT : Mechanical irritant

INHALATION : Acute (short term) exposure to dust levels exceeding the PEL may cause irritation of respiratory tract resulting in a dry cough. Chronic (long term) exposure to free silica containing airborne bentonite dust where levels are higher than TLV's may lead to development of silicosis or other respiratory problems.
Persistent dry cough and laboured breathing upon exertion are symptomatic.
INGESTION : No adverse effects.. PERMISSIBLE EXPOSURE LIMITS: Where crystobalite or tridymite are present use 1/2 of the PEL or TLV value for crystalline quartz.

Section 12: ECOLOGICAL INFORMATION
Ecotoxicity Environmental Fate : No data available. : No data available.

Section 13: DISPOSAL CONSIDERATION
This product, if disposed as received, is a non-hazardous waste on the basis of TCLP testing under current EPA Hazardous Waste Regulation as defined by 40 CFR Part 261 et al. Disposal/recycling/reclamation requirements will vary by location and type of disposal selected. Consult with state and local regulatory authorities.
**NOTE** Chemical additions, processing or otherwise altering this material may make the waste management information presented above incomplete, inaccurate or otherwise inappropriate.

Section 14: TRANSPORT INFORMATION
N/ A , Normal Method

Section 15: REGULATORY INFORMATION
IMMEDIATE (Acute) Health Hazard: NO DELAYED (Chronic) Health Hazard: YES FIRE Hazard: NO
REACTIVITY Hazard: NO
Sudden Release of PRESSURE: NO

Section 16: OTHER INFORMATION
** Please Note: The above provided information is as per our best knowledge and long research. It may be differ to place to place and method of use of this product. This information is given for safe handling and us